Felling Trailers Tilt Slide Axle Trailer (TSA) is perfect for recovery, towing an array of equipment, and moving ISO containers. Felling’s Slide Axle Tilt trailers are equipped standard with the following key features:
Features may include:
(6) 5? Rollers, (2) V-rollers and Pad Hydraulic Sliding Axle System
Scrapers located in front of Rollers
4.5? Dual Ram Slide Axle Cylinder – Retracted Slide Axle Cylinder in the transport position prevents the ram from being exposed to the elements.
Knife Edge Approach with Chain Slots
Capacities ranging from 35 to 50 tons.
Hydraulic Power Up & Down, Slide Axle System
Undercarriage Roller Grease Bank
Hydraulic Power Supplied by Tractor PTO Wet Kit
Photos
Highlights
, Midwest
2026
Felling Trailers
DDI Series FT-24 DDI
Axles, Acc: EZ-Lube Hubs
Available
102" OD, 82" ID
hitct: Approximate Adjustment Hitch Range 14" to 23" (22" to 27" if Hyd) | 3" Adjustable Lunette Eye/Pintle, [C] 50,000 lb Plate Mount (5/8" Bolt)
Specifications
2026
Felling Trailers
DDI Series
FT-24 DDI
Flatbed
21,080 lbs
12,000 lbs, Oil Bath
hitch: Center of Coupler to Headboard, Appx
Appx: 24" Loaded, 26" Unloaded (Torsion)
102" OD, 82" ID
hitct: Approximate Adjustment Hitch Range 14" to 23" (22" to 27" if Hyd) | 3" Adjustable Lunette Eye/Pintle, [C] 50,000 lb Plate Mount (5/8" Bolt)
Axles, Acc: EZ-Lube Hubs
Deck Type: White Oak 2" Nom
3" Angle Lip Up
Ramps; Rear: 6' x 16" Angle Iron Spring Assist | Ramps, Acc: Full Width Ramp Rod | Tie Downs: D-Rings, 1" Straight | Jack: 12,000 lbs w/ Spring Loaded Drop Leg, Side Wind | Document Holder | No Conspicuity Tape
Electric, FSA (Fwd Self Adj) On All Axles
Rubber Torsion, 42" Spread
235/75R 17.5 J, 8 Bolt [17.5 x 6.75] Plate Wheel
Plug: 7 Pole RV
25,980 lbs
4,900 lbs
24,000 lbs
LED,4 tail light system, Sealed Wiring Harness
3/8" Safety Chains, Grade 70
Trailer: Felling Black # CCA945378 (White Felling Decal)